Sign in to confirm you’re not a bot
This helps protect our community. Learn more

How to Make a DIY Pottery Wheel | I Like To Make Stuff

I Like To Make Stuff
3.37M subscribers
1.1M views 6 years ago #ILikeToMakeStuff
We built a working pottery wheel for $200! It works great, come see how we did it! For $100 off select Casper mattresses, go to http://www.casper.com/iltms and use promo code: iltms *terms & conditions apply. TOOLS & SUPPLIES WE USED (affiliate links): https://kit.co/iliketomakestuff/diy-p... https://kit.co/iliketomakestuff/my-wo... https://kit.co/iliketomakestuff/shop-... MUSIC: http://share.epidemicsound.com/iltms For this project I knew that I needed a motor that had a lot of torque to handle the forces applied to the clay. I found a small DC motor meant as a replacement for Hover Boards. I could control this whole system with an off-the-shelf motor driver unit that allowed the wheel to increase in speed and change direction. Knowing that the motor's RPM was too high for conventional pottery throwing, Josh came up with a pulley reduction to slow the motor down. From the motor, we attached a 1.5" pulley that drives a 10" pulley with a v-be …...more
...more
Gluey Kid's Shirt
$20.00
I Like To Make Stuff
Let your little Maker show off in the shop with this Gluey shirt. This product is made especially for you as soon as you place an order, which is why it takes us a bit longer to deliver it to you. Making products on demand instead of in bulk helps reduce overproduction, so thank you for making thoughtful purchasing decisions! Some items are fulfilled from our office and will ship separately
Shop
I Like To Make Stuff
Stealth MAKE T-Shirt
$28.00
I Like To Make Stuff
Soft and lightweight, with the right amount of stretch. Black print on dark grey heather shirt. • 100% combed and ring-spun cotton (Heather colors contain polyester) • Ash color is 99% combed and ring-spun cotton, 1% polyester • Heather colors are 52% combed and ring-spun cotton, 48% polyester • Athletic and Black Heather are 90% combed and ring-spun cotton, 10% polyester • Heather Prism colors are 99% combed and ring-spun cotton, 1% polyester • Fabric weight: 4.2 oz (142 g/m2) • Pre-shrunk fabric • Shoulder-to-shoulder taping • Side-seamed
Shop
I Like To Make Stuff
M.A.K.E. T-Shirt
$28.00
I Like To Make Stuff
We DARE you to resist this one. Made of a thicker, heavier cotton, but it’s still soft and comfy. And the double stitching on the neckline and sleeves add more durability. • 100% ringspun cotton • 4.5 oz/y² (153 g/m²) • Pre-shrunk • Shoulder-to-shoulder taping • Quarter-turned to avoid crease down the center
Shop
I Like To Make Stuff
Arcade
$28.00
I Like To Make Stuff
Whether you are working in the shop or just hanging around, this tough shirt is up for the task. It’s made of a thicker, heavier cotton, but it’s still soft. And the double stitching on the neckline and sleeves add more durability. • 100% ringspun cotton • 4.5 oz (153 g/m2) • Pre-shrunk • Shoulder-to-shoulder taping • Quarter-turned to avoid crease down the center Size guide S M L XL 2XL 3XL Length (inches) 28 29¼ 30¼ 31¼ 32½ 33½ Width (inches) 18 20 22 24 26 28
Shop
I Like To Make Stuff
Perspective
$28.00
I Like To Make Stuff
Whether you are working in the shop or just hanging around, this tough shirt is up for the task. It’s made of a thicker, heavier cotton, but it’s still soft. And the double stitching on the neckline and sleeves add more durability.
Shop
I Like To Make Stuff
ILTMS Logo T-Shirt (Grey)
$28.00
I Like To Make Stuff
This asphalt shirt sports the ILTMS logo in 3 colors. It’s a high quality print on an America Apparel shirt, and it’s a great way to tell people that YOU like to make stuff too!
Shop
I Like To Make Stuff

hook up the motor to the power supply

2:01

turn on the speed controller

2:20

mount the motor here on a plate

3:04

mount this motor to the piece of wood

4:25

measured the outside of the shaft

5:05

attach the pulley

5:23

turn this into a table by building some legs

6:18

reinforce these legs with some stringers

10:18

mark eight inches from each one of the corners

12:01

drill a hole in the center

12:58

seal up all of these screw holes with some caulking

13:45

add another bead of caulking

13:54

we added a gasket underneath it with some eba foam

14:57

put on a little bit of epoxy

15:51

try to add some circles

17:15
I Like To Make Stuff tagged products below. Learn more
How to Make a DIY Pottery Wheel | I Like To Make Stuff
25KLikes
1,138,706Views
2019Apr 4
We built a working pottery wheel for $200! It works great, come see how we did it! For $100 off select Casper mattresses, go to http://www.casper.com/iltms and use promo code: iltms *terms & conditions apply. TOOLS & SUPPLIES WE USED (affiliate links): https://kit.co/iliketomakestuff/diy-p... https://kit.co/iliketomakestuff/my-wo... https://kit.co/iliketomakestuff/shop-... MUSIC: http://share.epidemicsound.com/iltms For this project I knew that I needed a motor that had a lot of torque to handle the forces applied to the clay. I found a small DC motor meant as a replacement for Hover Boards. I could control this whole system with an off-the-shelf motor driver unit that allowed the wheel to increase in speed and change direction. Knowing that the motor's RPM was too high for conventional pottery throwing, Josh came up with a pulley reduction to slow the motor down. From the motor, we attached a 1.5" pulley that drives a 10" pulley with a v-belt. The 10" pulley has a drive shaft through the center that will spin the pottery plate, called a bat. I mounted all of this to a piece of 3/4" plywood and drilled holes for some bearings that the drive shaft would go through. Now that I had the drive system attached to a platform, I flipped that piece over so that it would all be under the working surface. I cut some simple 2x4 legs and arranged them in a triangular pattern so that you could center the pat between your legs. I mounted the motor driver system to the rear of that platform and cut a simple shelf that will be attached later. The bat is the super flat surface on which the clay is worked. Looking online, I could only find bats that fit on a pottery wheel's existing spinning surface, none would fit onto the drive shaft that we made. Without an inexpensive commercial solution, we decided just to make our own bat. I decided to use a thick plastic cutting board and CNC out the pieces we needed. Josh modeled up the circular bat as well as a coupling that would lock into the drive shaft and fit into the underside of the spinning plate. With a little bit of filing the pieces fit together perfectly. I locked the coupling to the drive shaft with a nail and some epoxy. The bat fit snuggly down over the key in the coupling and the whole system worked perfectly. To ensure that there was enough support under the bat, I added some bearing casters that the bat could ride on top of. I quickly noticed that we had to add a rubbery gasket the the bottom to buffer the sound of the bat riding on the casters. This greatly reduced the noise level and I was really happy with the result. Everything was coming together and the pottery wheel was working surprisingly well. One thing that needed to be addressed was the slight wobble in the bat. Because we could trace every connection back to its origin, we found that the 10" flywheel and the drive shaft weren't quite straight. Luckily, we didn't screw down the plate holding the opposite end of the drive shaft just yet. Josh and I were able to work together to slightly adjust the flywheel and shaft position underneath so that they were perfectly square, which resulted in a tracked bat up above. All that was left was to use a lathe tool to score in some reference centering lines on the bat surface so you know where to center the clay. Although I have no idea how to properly use a pottery wheel, my wife and her friends do. One of my wife's friends is a professional potter and came by to test out the wheel. She seamlessly began molding and shaping a lump of clay into an awesome bowl. I asked her about the speed, the control, and the tracking, and she said that it performed just like a commercial pottery wheel. We were all taken back ever time she used the word "perfect" when comparing our $200 pottery wheel to ones you can buy for upwards of $1,000. I hope this video inspired you to trying something that you've always had an interest in. More specifically, if that interest has an expensive barrier to entry, look at making some of the equipment yourself, it can be just as rewarding. Subscribe: http://bit.ly/ILikeToMakestuffSubscribe Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideos Learn 3d modeling, get digital plans, and cool merch at https://iliketomakestuff.com Want to support ILTMS? Get exclusive content and more... http://www.iliketomakestuff.com/patreon FOLLOW:   / iliketomakestuff     / iliketomakestuff     / iltms   #ILikeToMakeStuff About I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more! These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about! How to Make a DIY Pottery Wheel | I Like To Make Stuff    • How to Make a DIY Pottery Wheel | I Like T...  

Follow along using the transcript.

I Like To Make Stuff

3.37M subscribers