Info Take your buffing game to a new level with a Pryme Cleaning Wheel Pack! These wheels effectively transform your part in just a few passes. What Does It Do? Fine wheel cleans and shines metals and leaves behind a brushed type finish Coarse wheel blends in scratches and scrapes, sands away casting texture and markings, and also works great for removal of rust, corrosion, and paint Works well for paint preparation Best for aluminum, but can be used on steel, stainless steel, magnesium, and brass with great results too How Does It Work?Available in 4", 6", and 8" wheel diameter. These wheels mount on a bench grinder or buffing machine, but the 4" wheels can be used on a drill as well. Available for 1/2" (12.7mm), 5/8" (16mm), and 3/4" (19mm) buffer shaft sizes. The larger the wheel, the longer it will last. Smaller wheels work better in tighter areas however and also cost a bit less. Wheels can be stacked on machine for a wider buffing path. Includes 1 Fine Cleaning Wheel 1 Coarse Cleaning Wheel Related ItemsThe Wheel Flange Set keep the wheel securely in place.Space the wheel away from the machine with a Wheel Spacer. Click on "Video" tab to see the wheels in useBuffer not includedAlways wear a dust mask or respirator and proper eye protection while buffing! Specs Specs Fine wheel is comparable to 400 grit Coarse wheel is comparable to 180 grit 3/8" thick Max RPM: 3600 Proudly made in the USA These wheels are made from a nylon strand material that is embedded with resin and an aluminum oxide abrasive for optimal stiffness and abrasion. Video Tags: Cleaning, Pad, Wheel, Scuff, Scotch, Abrasive, Buff, Buffing, Scotch Brite Wheel, Scotch Brite Pad, Abrasive Wheel, Abrasive Pad, Buffing Wheel, Buffing Pad

Info Take your buffing game to a new level with a Pryme Fine Cleaning Wheel. In just a few passes, you'll have a clean brushed finish on your part. What Does It Do? Cleans and shines metals such as aluminum, steel, stainless steel, brass, copper, titanium, and others Achieves a brushed type finish Blends in minor scuffs and scratches Also great for paint preparation How Does It Work?Available in 4", 6", and 8" wheel diameter. This wheel mounts on a bench grinder or buffing machine, but the 4" wheel can be used on a drill as well. Available for 1/2" (12.7mm), 5/8" (16mm), and 3/4" (19mm) buffer shaft sizes. The larger the wheel, the longer it will last. Smaller wheels work better in tighter areas however and also cost a bit less. Wheels can be stacked on machine for a wider buffing path. Related ItemsUse a Coarse Wheel for scratch removal and material shaping.The Wheel Flange Set keep the wheel securely in place.Space the wheel away from the machine with a Wheel Spacer. Click on "Video" tab to see the wheel in useBuffer not includedAlways wear a dust mask or respirator and proper eye protection while buffing! Specs Specs Comparable to 400 grit 3/8" thick Max RPM: 3600 Proudly made in the USA Sold individually, or in packs of 3, 5, 10, and 20 to save you some cash! This wheel is made from a nylon strand material that is embedded with resin and an aluminum oxide abrasive for optimal stiffness and abrasion.

Info Take your buffing game to a new level with the Mini Cleaning Wheel Kit! These wheels effectively transform your part in just a few passes. This kit is your go to for cleaning in tighter areas where bigger wheels can't get to. What Does It Do? Fine wheel cleans and shines metals and leaves behind a brushed type finish Coarse wheel blends in scratches and scrapes, sands away casting texture and markings, and also works great for removal of rust, corrosion, and paint Works well for paint preparation Best for aluminum, but can be used on steel, stainless steel, magnesium, and brass with great results too How Does It Work? When mounted on either a dremel tool or die grinder, this kit quickly transforms your scratched and dull looking parts. Includes Wheel Adapter 2" Fine Cleaning Wheel 1.5" Fine Cleaning Wheel 1" Fine Cleaning Wheel 2" Coarse Cleaning Wheel 1.5" Coarse Cleaning Wheel 1" Coarse Cleaning Wheel Related ItemsReplacement WheelsClick here to purchase the adapter separately Click on "Video" tab to see the wheels in useDremel tool not includedAlways wear a dust mask or respirator and proper eye protection while buffing! Specs Specs Fine wheel is comparable to 400 grit Coarse wheel is comparable to 180 grit Wheels are 3/8" thick with a 1/8" center hole Wheel adapter is machined from stainless steel and includes a low profile stainless mounting screw Max RPM: 25,000 Proudly made in the USA These wheels are made from a nylon strand material that is embedded with resin and an aluminum oxide abrasive for optimal stiffness and abrasion. Video Tags: Cleaning, Pad, Wheel, Scuff, Scotch, Abrasive, Sanding, Drum, Dremel Attachment, Buff, Buffing, Die Grinder Attachment, Wheel Adapter, Adapter, Mandrel, Shank, Template, Kit, Mini, Pack Fitment The Dremel kit is designed to be used on a Dremel or rotary tool that uses a 1/8" shaft size. Dremel Tool Recommendations Dremel Brand Tool Click Here Avid Rotary Tool Click Here Wen Rotary Tool Click Here The die grinder kit is designed to be used on a die grinder that uses a 1/4" shaft size, or could be used on a high speed drill as well. The best results will come with it on a die grinder. Recommended Die Grinders Ingersoll Rand Grinder Click Here Neiko Grinder Click Here High Speed Drill Click Here Electric die grinder Click Here Whenever you're doing any sort of grinding or sanding you'll want to use eye and respiratory protection. Trust us, you do not want to be breathing in metal particles! At the bare minimum, wear a dust mask and glasses. A great product for protecting yourself is this respirator Click Here Alternatively, this is also a great respirator to pair up with safety glasses Click Here Use these filters with the previously mentioned respirators Click Here

Info What Does It Do? Sands out scratches and sun damage Produces a beautiful shine on plastic How Does It Work? This kit includes sandpaper discs and polishing wheels. The sandpaper removes scratches and sun fading. After the plastic has been sanded smooth, the polishing wheels are used to produce a shine. The sandpaper discs can be used on a machine sander or by hand. They are available in 3", 5", and 6" kits. For machine sanding, you can use either a drill (3" kit) or 5" or 6" sander (orbital or dual action). The hand sanding kits are available in 3" and 5" sizes. The polishing wheels are designed to be mounted on a bench grinder. Machine Kits Include: 45 Sandpaper Discs (5 of each grit) 2 Polishing Wheels 1 Polishing Compound (3.5 oz bar) Guide Coat Full Instructions 3" kit comes with drill adapter Hand Kits Include: 45 Sandpaper Discs (5 of each grit) 2 Polishing Wheels 1 Polishing Compound (3.5 oz bar) Sanding Block Guide coat Full Instructions The 3" drill kit comes with an adapter pad to attach the sandpaper to. The 5" and 6" kits do not have an adapter, you must have a hook and loop pad attached to your sander already (most sanders come with them). See the "Tips" tab for sander recommendations. Click on "Video" tab to see the kit in use. -Bench grinder or sanders not included.-Always wear a dust mask or respirator and proper eye protection while polishing! Related Items Click here to purchase the polishing wheels separately Click here to purchase the polishing compound separately Click here to purchase the sandpaper discs and drill adapter separately Click here to purchase the hand sander separately Click here to purchase a bench grinder extension (allows for more room while buffing) Specs Specs Proprietary polishing wheel design beautifully polishes plastic without causing damage Polishing wheels are 6" diameter and 1/2" wide Max RPM of wheels: 3600 Polishing wheels are available for 1/2" (12.7mm), 5/8" (16mm), and 3/4" (19mm) buffer shaft sizes (select upon checkout) Compound is a unique blend formulated for plastics. It's made with a fine abrasive that gently smooths scratches without damage the plastic. Compound is solid in form but melts onto the polishing wheel as it's spinning. How To How To Please refer to the buffing chart at the bottom of this tab for the steps necessary to restore plastic. Keep in mind, if you are looking to achieve the best possible finish, you will need to do all stages of sanding and polishing. You cannot go right to the final step and expect a great finish. Plastics (especially white) that are yellowed from fuel cannot be fixed with this method. Crease marks from bending also cannot be sanded or polished out. Sanding -Sanding is the most important step in plastic polishing, take your time and follow each step carefully. -Clean your part thoroughly prior to sanding. -Position your part so it stays in place while sanding. For example, most gas tanks fit over a saw horse. This will make sanding much easier. -If your part has deep scratches, start with 320 grit sandpaper. For parts with minor scratches, begin with 400 grit. You will work your way up to 2000 grit in the remaining steps. -Start by sanding dry with the first grit of sandpaper you choose. Once the sandpaper starts to lose it’s effect, sand the part with soapy water to clean it. -Sand in different directions and patterns to achieve the most uniform finish. Use light to medium pressure while sanding, heavy pressure can gouge the part. -Keep the sander moving across the part, do not stay in one area for very long. Keep the sander flat on the part to prevent dips in surface. -Use machine sanders at medium speed. If using a drill to sand, you must use the provided foam pad to prevent gouging of the part. -Keep sandpaper clean during sanding process. -After the first sanding grit, check for any leftover scratches or pits. If they are not removed in the first stage of sanding, they will be visible in the final finish. -You can check for scratches using the provided guide coat. Sprinkle a small amount of powder onto the part and

Info What Does It Do? Blends in scratches and scrapes Sands away casting texture and markings Also great for paint preparation Best for aluminum, but can be used on steel, stainless steel, magnesium, and brass with great results too How Does It Work? When mounted on a bench grinder or buffing machine, this wheel effectively sands away metal. Whether you're looking to remove scratches or the texture on a cast part, this is the wheel that will get the job done. This wheel has fiber pad in between flaps of sandpaper for smooth and effective action. Offered in 80 grit, 180 grit, and 320 grit. Use 80 grit for blending in deep scratches and removal of casting texture on steel and stainless steel. Use 180 grit for blending in deep scratches and removal of casting texture on aluminum and soft metals. Works well for light scratches on steels. Use 320 grit as a finishing wheel. Related Items:The Wheel Flange Set keep the wheels securely in place.Space the wheels away from the machine with a Wheel Spacer. Click on "Video" tab to see the wheel in use.Buffer or stand not included Always wear a dust mask or respirator and proper eye protection while buffing! Specs Specs Mounts on a bench grinder / buffing machine 6" diameter 1" wide Max RPM: 3600 Available for 1/2" (12.7mm), 5/8" (16mm), and 3/4" (19mm) buffer shaft sizes Sold individually or in a pack of 3 to save you some cash! Video Tags: Cleaning, Pad, Wheel, Scuff, Scotch, Abrasive, Sanding, Flap, Drum, Fiber, Buff, Buffing, Scotch Brite Wheel, Scotch Brite Pad, Abrasive Wheel, Abrasive Pad, Buffing Wheel, Buffing Pad

What Does It Do? This kit transforms the look of your CR or CRF by adapting a 2017-2020 CRF450R front fender and number plate onto your stock triple clamps. Does not include fender and number plate, this is the mounting kit only. Includes Stainless steel mounting bracket for number plate Template for re drilling fender Hardware to mount number plate Clear vinyl fork protectors (if using a Cycra stadium plate) Mounting instructions Fitment Select your year and model above Designed for OEM triple clamps, may not work with aftermarket triple clamps Other things you'll need A 2017-2020 CRF450 front fender and number plate. You can use OEM or aftermarket brands like Cycra, UFO, or Acerbis. A Cycra stadium number plate is recommended since it fits the best, but you can use the OEM style with no problems. Make sure you buy the fender and number plate for the same year, and try to buy the same brand plastics so the colors match. For example, if you buy a 2018 CRF450 fender, get a 2018 CRF450 number plate to match. www.rockymountainatvmc.com has the best prices on plastics. It is possible to mount a 2010-2016 CRF450 fender and number plate with this kit, but there will be a small gap between the fender and number plate. The 2017-2020 style fits perfectly. Drill 3/8" drill bit Common hand tools like screwdrivers and sockets Does not include fender or number plate. Video Tags: Re Style Bracket, Restyle Kit, Number Plate Bracket, Adapter Bracket, Update Kit, Update Bracket, Update Plastics, Update Front End