Sign in to confirm you’re not a bot
This helps protect our community. Learn more

use 120 grit sandpaper

1:26

put primer over the 120 grit sandpaper

2:36

sand the area with some scuffing paste and gray scotch-brite

3:25

spray some high-build primer

3:51

sprayed three coats of the primer

4:52

using six hundred grit wet sandpaper

5:16

paint the base coat

6:23

pump the color into the can

6:54

start spraying the base coat

7:38

cover the area with paint

8:17

sprayed the base coat

8:56

spray the clear coat spray full coats of base coat

9:23

pull up this little cap at the bottom

11:27

overlapping by 50 % keeping the can a good distance from the panel

12:19
customspraymods tagged products below. Learn more
How to paint with Spray Cans
Video with cheap cans available here.    • How to fix a scratch & stone chip with spr...   In this video I show how to fix a scratch in your paintwork. Im only using spray cans so its a DIY friendly methods. Items used are. 120g, 240g dry sandpaper 600g wet sand paper Grey scuff pads Scuffing Paste Wax & Grease Remover Masking Taper Masking Paper Plastic Primer filler in a spray can Colour matched basecoat in a spray can Clear coat in a spray can. Items available from http://www.vgautopaints.com.au

Follow along using the transcript.

customspraymods

284K subscribers