Marine Grade Base Coat 100ml (3.4 oz.): Our Marine Base Coat is a next-generation, water-based graphene coating that provides long-lasting protection. This product is specifically designed to work for interior and exterior environments. This innovative coating effectively bonds with the surface, creating an invisible yet highly durable and environmentally resistant top layer. This product performs best when paired with our Marine Top Coat. Marine Grade Top Coat 100ml (3.4 oz.): Marine Top Coat represents the next level of advanced nanohybrid protection. With just a single application, you will experience exceptional hydrophobicity, gloss, and smoothness. This top coat serves as a supplementary layer of protection, enhancing the durability of the previously applied Marine Base Coat. Applicable Surfaces: -Oiled or Varnished Wood -Plastics -Glass -Ceramics -Plexiglass -Epoxy Benefits: -Water-based (Environmentally Friendly & Non-Toxic) -High Gloss -Gives a "silky" feel to the surface -High UV Resistance -2 Year Protection (Outdoors) -Spray and Wipe (no applicators needed) These coatings were originally designed to protect high-end Yachts, making them perfect for any environment, be it interior, or exterior!

Black Forest Ceramic Kits Our Ceramic finishes are designed to be used as an additional layer of protection over top of your existing finish. We recommend our Black Forest Furniture Oil. Now shipping from Europe through our new website! Base Coat: Durable and scratch resistant finish that reaches a thickness of 2-2.5 microns per layer. The 9H hard finish bonds and penetrates into the surface. Gold: 1 year protection Platinum: 2 year protection Diamond: 5 year protection Top Coat: Improves the shine, smoothness and strength of the base coat. Pair the Black Forest Ceramics Top Coat and Base Coat for additional protection. Can be reapplied yearly or bi-yearly to protect and extend the Base Coat Ceramic coating and hydrophobicity. Benefits: Fast Curing Water beads on surface Anti-Scratch Easy to clean Anti-Abrasion Renews old surfaces Strong UV protection High Film Hardness (9H) - one hardness level below diamonds Protects against water spots Fills tiny cracks and micropores, making the surface smooth, even and glossy Exceptional hydrophobic (water-resistant) and oleophobic (fingerprint resistant) properties Durability up to 2 years per layer (depending on general wear and tear) Coverage is 2 sqft/mL Included in kit: Top Coat Base Coat of your choice Applicator Block 4 , 6 or 12 Microfibre applicator cloths based on the kit size Sold in equal parts 1:1 Top coat and Base coat (Kit size includes the total of both containers) Example: 20mL kit has 10mL of base and 10mL top coat The time between application is about 30 minutes, about 8 hours dry to touch (you can use it but no liquids) and 24 hours for full cure. Please view our question and answer section below and feel free to ask a question for more information.

Marine Grade Base Coat: Our Marine Base Coat is a next-generation, water-based graphene coating that provides long-lasting protection. This product is specifically designed to work for interior and exterior environments. This innovative coating effectively bonds with the surface, creating an invisible yet highly durable and environmentally resistant top layer. This product performs best when paired with our Marine Top Coat. Marine Grade Top Coat: Marine Top Coat represents the next level of advanced nanohybrid protection. With just a single application, you will experience exceptional hydrophobicity, gloss, and smoothness. This top coat serves as a supplementary layer of protection, enhancing the durability of the previously applied Marine Base Coat. Applicable Surfaces: -Oiled or Varnished Wood -Plastics -Glass -Ceramics -Plexiglass -Epoxy Benefits: -Water-based (Environmentally Friendly & Non-Toxic) -High Gloss -Gives a "silky" feel to the surface -High UV Resistance -2 Year Protection (Outdoors) -Spray and Wipe (no applicators needed) These coatings were originally designed to protect high-end Yachts, making them perfect for any environment, be it interior, or exterior! Each Kit Includes: 100ml (3.4 oz.) Base Coat 100ml (3.4 oz.) Top Coat 10 Microfibre Buffing Cloths

BF DEEP Resin is formulated for casting in a mold up to 2” Thick at 20 ̊ C/68 ̊ F, ready to de-mould and work in 7 days with full hardness in 21 days. With active cooling thicker casting without distortion is possible. BF DEEP features a long set-up time for bubble release or removal and a moderate exothermic reaction with reduced shrinkage. BF DEEP is ideal for combining with wood in casting “river tables”. Prime or seal wood surfaces with BF COAT Resin to eliminate bubbles forming before pouring thick castings. Sealing wood surfaces is not required if you are able to cool the resin as it cures. For large pours, we recommend a room temperature of 15C°/59F°, in addition to fans blowing on the surface as the resin cures. Formulated non-hazardous and non-toxic. PLEASE NOTE: 160G (606L) kit does not include free shipping due to the size of the containers; may also require 1-2 weeks leadtime to ship Check Resin for Clarity before Mixing with Hardener. The Resin component of your kit may turn milky or form crystals. This occurs much like honey crystallizes, this occurrence of milkiness crystals in no way affects the quality of the resin/ when warmed up will return to a clear liquid and so will the resin. Put the container of Resin in a warm bath, (smaller containers can be warmed in the microwave for 2-3 minutes). Slightly milky in colour - warm to 20-25°C (68-77°F) will clear the resin. If larger crystals have formed then warm in a water bath to 45-50°C (115-125°F). This will restore clarity, you may be required to charge the water a few times to maintain the warmth, it will take around 30-40 minutes. Do NOT exceed 70°C (160°F)Higher temps will soften the container. Once the resin is clear, let it cool down to room temperature before mixing with Hardener.If you have any questions please call 403-255-6044 Toll-Free 1-877-686-606

After decades of producing custom solid wood furniture, Black Forest Wood Company has tried nearly every oil finish on the market. Finally, we've decided to release our own Black Forest Oil which combines all of our favourite traits into a single product. Our Black Forest Furniture Oil has become our go-to product for nearly all of our manufactured goods! Can be applied as a monocoat (single coat) or multiple coats can be applied to achieve a higher sheen. 1 coat matte, 2 coats satin. Used by professionals Resistant to stains caused by liquids. Dries to a hard finish for abrasion resistance Forms a molecular bond with the wood Apply by hand or mechanically with our Mirka Sanders Pairs perfectly with Black Forest Ceramics Dries to touch in 24 hours Coverage: 200-400 sq/ft per Litre Works over wood and epoxy Made in Italy Apply with zero grit application pad Combine with Black Forest Catalyst for increased stain resistance, scratch resistance, and reduced drying time. See our Black Forest Finishing Kits to get everything you need at a package price.

BF Coat Thick Resin cures to a clear high gloss finish which can be used to surface coat or cast projects up to 1/4" (6mm) thick. Coat has built-in air release properties and is UV stable; it is self-levelling and won't shrink or warp over time. Should I use Coat Thick or Coat Thin? The mention of "thick" and "thin" refers to the viscosity of the products. Coat Thick is higher in viscosity allowing for more control of the product when coating a surface. When doing pigmented coatings, this prevents colours from bleeding together as easily. Coat Thin is lower in viscosity making it more ideal for coating larger surfaces where you need the product to easily spread. It is also an ideal choice for crack filling as it will easily flow into small voids. Max. depth of pour: 1/4"Pot Life: 10-15 minutesCure Time @ 20°C/69°F: 24 hoursCoverage @ 1/8": 0.29 L/sq.ft Uses and Applications: BF Coat Resin is ideal for coating, gap filling and thin casting. It is a great primer/sealer to eliminate bubbles forming prior to casting live edges or porous materials when using BF Deep Resin. ASTM Certified non-hazardous and non-toxic. Mix ratio 1 to 1 Check Resin for Clarity before Mixing with Hardener. The Resin component of your kit may turn milky or form crystals; this occurs much like honey crystallizes. This occurrence of milkiness or crystallization in no way affects the quality of the resin! When warmed up, it will return to a clear liquid. Put the container of Resin in a warm bath, (smaller containers can be warmed in the microwave for 1-2 minutes). Slightly milky in colour - warming to 20-25°C (68-77°F) will clear the resin. If larger crystals have formed then warm in a water bath to 45-50°C (115-125°F). This will restore clarity. You may be required to charge the water a few times to maintain the warmth, as it will take around 30-40 minutes. Do NOT exceed 70°C (160°F) Higher temps will soften the container. Once the resin is clear, let it cool down to room temperature before mixing with Hardener. If you have any questions please call 403-255-6044 Toll-Free 1-877-686-6061