INJEKTO 3 is a small and powerful plastic injection molding machine used by entrepreneurs, schools, startups and hobbyists to create products, prototype, test molds (3D printed or metal) and teach about the injection molding process. The possibilities are endless! PARTS INCLUDED IN THE INJEKTO 3 KIT: Mechanical Parts: 1x Steel Frame (All 14 Pieces) 1x Heated Chamber Set 1x Aramid Insulation Cloth 1x Precision Injection Ram 1x Ram Thumbscrew 1x Aluminum Pellet Hopper 2x Pneumatic Cylinders 4x Pneumatic Quick Connectors Air Tubing + Connectors Safety Shield 1x Jar of Easy Flow Plastic Pellets (250g) All Necessary Bolts and Nuts Electronic Parts: 1x 24V Power Supply / Cables (1000W) 2x Mushroom Head Buttons High-Temperature Wire (Fiberglass Insulated) 1x PID Temperature Controller (Operating Voltage: 24VDC) 1x AC Solid State Relay (Operating Voltage: 24VDC) 1x Thermocouple 4x Heating Elements (110W Each / Operating Voltage 24VDC) 1x Pneumatic Solenoid Maximum Pressure: 90PSI Operating Temperature: 5-50oC Operating Voltage: 24VDC INJEKTO 3 SPECS: Maximum Air Pressure: 90 PSI Injection Force at 90 PSI (maximum): 9000N (918 kg) Injection Volume of 50 mL Temperature: Maximum 300oC/572oF (Recommended: Use below 250oC/482oF) Compressor Required: Minimum 6 gallon tank capable of 80 PSI Weight: 34 kg (75 lbs) Height: 69 cm - 97 cm (27 inch - 38 inch) Width: 56 cm (22 inch) Depth: 15.5 cm (6.1 inch) Compatible Plastic Materials: ABS, PLA, PP, PE, PS, TPU, TPE and more Assembly Time: 2 hours from start to finish By purchasing an INJEKTO 3 Mechanical Kit, you acknowledge that you have read and agree to the terms and conditions.

SHREDII is a small and powerful industrial shredder used to recycle materials such as plastics, aluminum cans, 3D printed material and more! It's used by entrepreneurs, schools, startups and hobbyists for recycling projects, and all other applications that require a mini shredder. PARTS INCLUDED IN THE SHREDII 8 KIT: 6x Frame Panels 1x 2HP Motor 16x Drive Gears 1x SHREDII Gearbox 27x Shredder Blades (AR500 Steel) 48x Spacers 4x Drive Shafts 13x Active Blade Cleaners 5x Shaft Support Bearings 5x Key Stock For Blades And Spacers 1x Safety Cover (Rectangular) 3x Gear Safety Covers 1x Forward/Reverse Control Switch All Required Nuts and Bolts SHREDII 8 SPECS: Weight (with motor): 40kg (88lbs) Length: 39cm (15 inches) Width: 23cm (9 inches) Height (with motor): 51cm (20 inches) Feeding Inlet: 8.1cm x 7cm (3.2 x 2.7 inches) Overall Dimensions: 39cm x 23cm x 51cm (with motors and gearboxes) Motor Specs: 2HP AC Motor, 56C Frame Size, 5/8" Shaft Works with both 115V and 230V Single Phase Rated Speed: 1750 RPM Safety Controls: Forward/Reverse Switch By purchasing a SHREDII 8 Mechanical or Electronics Kit, you acknowledge that you have read and agree to the terms and conditions.

INJEKTO M is the world’s first desktop metal injection molding machine. It comes fully assembled with everything you need to make solid metal parts right out of the box. How It Works: Using INJEKTO M, simply inject MASTE (our patent-pending metal paste) into a mold. After a few minutes, place the hardened MASTE part into the included furnace for two hours. When cooled, you will have pure metal parts!

MASTE Copper is a patent-pending metal paste. It is compatible with INJEKTO M, but can also be used independently. When heated and extruded into a mold, the cooled/hardened MASTE part can be placed into a furnace to produce pure copper metal parts. MASTE is 100% reusable prior to being placed in the furnace, so you can keep remolding it if needed. MASTE COPPER SPECS: MASTE will begin to flow at 80oC (176oF) One Step Sintering Process (No Debinding Step) Sintering Instructions: Sinter at 1020oC (1868oF) for 2 hours. Specific instructions included with purchase. Shrinkage (After Furnace): 12% Density of MASTE post-sintering: 8.00 g/cm³ Thermal Conductivity (Finished Parts): 250W/(m.K) Weight Per Jar: 333g (3 jars included, total 1kg)

MASTE Bronze is a patent-pending metal paste. It is compatible with INJEKTO M, but can also be used independently. When heated and extruded into a mold, the cooled/hardened MASTE part can be placed into a furnace to produce bronze metal parts. MASTE is 100% reusable prior to being placed in the furnace, so you can keep remolding it if needed. MASTE BRONZE SPECS: MASTE Bronze will begin to flow at 80oC (176oF) One Step Sintering Process (No Debinding Step) Sintering Instructions: Sinter at 820oC (1508oF) for 3 hours. Specific instructions included with purchase. Shrinkage (After Furnace): 12% Density of MASTE Bronze post-sintering: 7.50 g/cm³ Thermal Conductivity (Finished Parts): 35W/(m.K) Weight Per Jar: 333g (3 jars included, total 1kg)

FUSION MIX is a patent-pending powder that helps fuse MASTE into pure metal. This powder is used to cover MASTE parts in a crucible when placing them into a furnace. This is essential for creating perfect parts. Weight Per Jar: 250g