Sign in to confirm you’re not a bot
This helps protect our community. Learn more
Raspberry Pi 3 setup with 7" screen
2KLikes
222,971Views
2017Apr 20
Yes, I know the lightning bolt means low voltage. It was just plugged into a nearby laptop to test the bootup. I put together a Raspberry Pi 3 with a 7" screen. I am running Retropie on it. I built this to try out homebrews and fan translated games. Just to warn you guys, there is a hardware issue with the screen, it is upside down. All that means is that the power and HDMI sit at the bottom and it will fall over. You can not flip it around. So In Terminal, type "sudo nano /boot/config.txt" Add the line "lcd_rotate=2" to the top of the file. Press CTRL+X Then Y Then Enter. And reboot! Here are the parts I used from Amazon https://www.amazon.com/Raspberry-Sing... https://www.amazon.com/SanDisk-microS... https://www.amazon.com/RS-Raspberry-7... https://www.amazon.com/iPazzPort-Wire... https://www.amazon.com/Buffalo-iBuffa... https://www.amazon.com/Enokay-Supply-...

Follow along using the transcript.

Player Friendly

1.21K subscribers