The tiniest in antique wrenchery, this wrench is based off an 1879 patent by Charles Billings. Each one is made from 3/8in solid steel (44W) and is 3in long. All adjusters are solid brass. This 3in/7.5cm long wrench is intended for use with nuts and bolts up to 7/16in/1.1cm, but the jaws open to just under 1in/2.5cm if you need that extra distance. Perfect to carry every day and easily made into a bottle opener. Each wrench is UNIQUELY NUMBERED. Entirely MADE IN CANADA.

The most comfortable in antique wrenchery, this wrench is based off an 1879 patent by Charles Billings, but with many modern improvements. Each one is made from 7/16"/11mm solid steel (44W) and is 4.75"/120mm long. This pocket wrench is a new version of the wrench we have been making for years. Every part is now fully machined resulting in much tighter tolerances and a better fit and finish than ever before. Compared to modern adjustable wrenches, the finer threads on the adjuster of this wrench allow for a tighter grip on fasteners. The jaws, being perpendicular to the handle, allow for more potential torque when the wrench is being used in line with the fastener (see video). A chamfer is added to the handle of the wrench for a more comfortable grip. The jaw design also fits square nuts and bolts perfectly. This pocket wrench was originally intended for use with nuts and bolts up to 5/8"/16mm, but the jaws open to 1.3"/33mm if you want to push it beyond it's capacity. Each wrench is UNIQUELY NUMBERED. Entirely MADE IN CANADA.

The finest in antique screwdrivery, this screwdriver is based on an 1904 patent by William Ward, but with several modern improvements. Each screwdriver is made from 1144 steel, ~4in/101mm long, and weighs 0.08lb/38g. The blade is 0.25in/6.35mm wide and 0.04in/1 mm thick. Blade is hardened to 52 HRC. The blade on the screwdriver is now a consistent width, unlike the tapered design of most modern screwdrivers, to assist in removal of countersunk screws. The blade tip also has a hollow-ground design ensuring 0.04in/1.5mm of the tip is parallel, allowing for maximum engagement with the fastener. The handle has been re-positioned so that it is perpendicular with the blade to allow for increased strength when using the screwdriver for prying. The handle has also been designed to encapsulate the handle scales, so that even without brass pins, the wooden (solid cherry) scales will stay in place. The square shaft allows you to use wrenches to increase the amount of torque you can apply to the fastener if they are really stuck! Each screwdriver is UNIQUELY NUMBERED under the handle scales. Entirely MADE IN CANADA.

It has the logo you want on the t-shirt you need! Custom designed graphic is printed in vivid color and high resolution using state of the art color transfer technology. Shirts are made from super soft 100% combed ringspun cotton. Printed in the USA.

Just like the normal logo, but more antique-y... Custom designed graphic is printed in vivid color and high resolution using state of the art color transfer technology. Shirts are made from super soft 100% combed ringspun cotton. Printed in the USA.

The finest in antique socket-drivery, this socket driver is based on an 1904 patent by William Ward, but with several modern improvements. Each socket driver is made from 1144 steel, ~7.25in/18.5cm long, and weighs 0.23lb/105g. . The main shaft is square so you can use a wrench on it for more torque. The socket driver end is for 1/4" square drive attachments and hardened to 52 HRC. The wooden (solid cherry) scales are hand finished with a hardening wax. Each socket driver is UNIQUELY NUMBERED under the handle scales. Entirely MADE IN CANADA.