Sign in to confirm you’re not a bot
This helps protect our community. Learn more
Gluey Kid's Shirt
$20.00
Let your little Maker show off in the shop with this Gluey shirt. This product is made especially for you as soon as you place an order, which is why it takes us a bit longer to deliver it to you. Making products on demand instead of in bulk helps reduce overproduction, so thank you for making thoughtful purchasing decisions! Some items are fulfilled from our office and will ship separately
Stealth MAKE T-Shirt
$28.00
Soft and lightweight, with the right amount of stretch. Black print on dark grey heather shirt. • 100% combed and ring-spun cotton (Heather colors contain polyester) • Ash color is 99% combed and ring-spun cotton, 1% polyester • Heather colors are 52% combed and ring-spun cotton, 48% polyester • Athletic and Black Heather are 90% combed and ring-spun cotton, 10% polyester • Heather Prism colors are 99% combed and ring-spun cotton, 1% polyester • Fabric weight: 4.2 oz (142 g/m2) • Pre-shrunk fabric • Shoulder-to-shoulder taping • Side-seamed
M.A.K.E. T-Shirt
$28.00
We DARE you to resist this one. Made of a thicker, heavier cotton, but it’s still soft and comfy. And the double stitching on the neckline and sleeves add more durability. • 100% ringspun cotton • 4.5 oz/y² (153 g/m²) • Pre-shrunk • Shoulder-to-shoulder taping • Quarter-turned to avoid crease down the center
Arcade
$28.00
Whether you are working in the shop or just hanging around, this tough shirt is up for the task. It’s made of a thicker, heavier cotton, but it’s still soft. And the double stitching on the neckline and sleeves add more durability. • 100% ringspun cotton • 4.5 oz (153 g/m2) • Pre-shrunk • Shoulder-to-shoulder taping • Quarter-turned to avoid crease down the center Size guide S M L XL 2XL 3XL Length (inches) 28 29¼ 30¼ 31¼ 32½ 33½ Width (inches) 18 20 22 24 26 28
Perspective
$28.00
Whether you are working in the shop or just hanging around, this tough shirt is up for the task. It’s made of a thicker, heavier cotton, but it’s still soft. And the double stitching on the neckline and sleeves add more durability.
ILTMS Logo T-Shirt (Grey)
$28.00
This asphalt shirt sports the ILTMS logo in 3 colors. It’s a high quality print on an America Apparel shirt, and it’s a great way to tell people that YOU like to make stuff too!

the floor for the concrete

0:28

screwed in the pieces around the sides

0:49

seal up all of the seams

1:23

pour the concrete

1:50

started pouring in a little bit of concrete

2:40

build the legs the concrete has been curing for about 48 hours

3:48

removed all of the extra little bits of concrete

4:31

added 10 drops of blue dye

4:57

cover the bottom surface

5:14

mixed up another batch with the same amount of blue dye

5:29

draw any air bubbles out of the crack

6:07

used two gallons of epoxy

6:22

took off the other outside panels and the side pieces

6:40

clean up all the surfaces

7:12

cut down those pieces of pine to their final width

7:46

cut out the very center of each one of these pieces

7:56

added a whole lot of glue to each one of the surfaces

9:23

start the sanding process

9:49

up through the grits to about 1500 grit paper

10:04

surface as smooth and glossy

10:35

wiping down all of the surfaces

11:11

rid of all the air bubbles

12:02

sealed the concrete

12:26
How to make an Ocean Table // Concrete and Epoxy Resin | I Like To Make Stuff
136KLikes
9,025,442Views
2017Feb 16
I made a concrete/epoxy table that looks like a cross section of the ocean! Check out Homemade Modern:    / homemademodern   TOOLS LIST: (some are better than the versions I own) http://www.homedepot.com/p/Quikrete-8... - Quikcrete 5000 http://amzn.to/2lh6722 - Clear Table Top Epoxy Resin http://amzn.to/2kfmWKv - Nitrile Gloves (for mixing) http://amzn.to/2kLu8Bf - Plastic mixing buckets http://amzn.to/2aCJYGu - SawStop cabinet saw http://amzn.to/2aofRls - 8" Dado stack http://amzn.to/2axOLvq - Dewalt 20v drill driver combo http://amzn.to/2da9fOJ - Evolution miter saw (cuts wood, alum, steel, etc) http://amzn.to/2dcJoTR - Countersink drill bits http://amzn.to/2akFubx - Orbital Sander http://amzn.to/2awLSaO - Shop Fox Hanging Air Filter http://amzn.to/2akFN6c - 2HP Dust Collector http://amzn.to/2axPmNA - 1 Micron bag http://amzn.to/2axFGW9 - Speed square http://amzn.to/2ay8MSs - Digital Angle Gauge http://amzn.to/2kkwcPS - Danish Oil http://amzn.to/2ayihkF - Quikclot clotting sponge http://amzn.to/2aLCCCN - First aid kit http://amzn.to/2aovz06 - Respirator http://amzn.to/2aW3nHn - Filters http://amzn.to/2aY182W - Eye protection http://amzn.to/2axUZ0X - Ear protection Subscribe: http://bit.ly/ILikeToMakestuffSubscribe Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideos Learn 3d modeling, get digital plans, and cool merch at https://iliketomakestuff.com Want to support ILTMS? Get exclusive content and more... http://www.iliketomakestuff.com/patreon FOLLOW:   / iliketomakestuff     / iliketomakestuff     / iltms   #ILikeToMakeStuff About I Like To Make Stuff: We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more! These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about! How to make an Ocean Table // Concrete and Epoxy Resin | I Like To Make Stuff    • How to make an Ocean Table // Concrete and...   I Like To Make Stuff    / iliketomakestuff  

Follow along using the transcript.

I Like To Make Stuff

3.37M subscribers